Greatest Motion Sensor Light Switches Prices And Reviews
It is ideal to know that one of the best possible ways of securing your premises and at the same time conserve energy is to use sensor light switches. Depending on the one you choose for your home , you will always find light switch that intermittently work for between 15 minutes to 24 hours. The motion sensitivity of this devise can work at 150 to 180 degrees, and investing in such a devise will help you save cost on energy and ensuring the security of your home.
There are some accessories you will definitely need when you want to install your sensor switch. Your motion sensor lights is a must and then you will need a Phillip head screw driver, A circuit tester, a flat screw driver, electrician tapes, wire connectors, and wire stripers among several others. First of all you need to take some precautions before installing your light switch , as a matter of fact , you need to switch off power at the circuit box, you may have to turn off the breakers randomly if there are no labels on them until you discover the right ones to turn off. Once you have turned on the right breaker , then you must remove the wall plate from the switch you are replacing, and test the switch to be sure that there is no power-use a circuit tester for this purpose.
You need to locate the old switch and clip the wires with the wire cutter and after that you need to remove the plastic insulation at the end of the black and white wires with the aid of a wire stripper. To the black wire coming from the outlet, you should connect the black wire on the motion sensor light switch, use a wire connector to connect the two black wires after twisting them together. The same procedure should be used for connecting the red wire on the censor to the white wire coming from the outlet. Since the green and yellow wires are not needed , you can cap them using the wire connector.
After the connection of the wires , you should neatly and carefully place them back in the switch box alongside the wireless light switches. Attach the censor to the outlet by using the switch that comes with the switch and your censor light switch is ready for use.
Depending on the time frame you have for your motion switch , you can test your switch in a number of ways. You can test it either in the morning , evening or night depending on when you need it most. If in the morning or afternoon, you can arrange for a person to act as a passerby and when the sensor light switch goes on and off, then you should know that it is perfectly working otherwise you may have to check for the connections or probably the light sensor is not ideally working.
